SPRING CONSIGNMENT AUCTION
ONLINE ONLY
Tues. March 9, 2021
Starts closing 6:00 pm Tues. March 9th, 2021

Located: Hamilton Auction Co. off Interstate 90 at Dexter, MN exit #193 then 1/4 mile east on Hwy 16 (130 State Hwy 16)

NO VEHICLE OR TRAILER TIRES--Titled items must have a current certificate of title or registration card when brought in to sell.
Check our web site for complete sale information, updated listing & pictures

TRACTORS

• 2012 Case IH Magnum 260, PS trans, front suspension, 2300 hrs, quick hitch, PTO, front weights, 4 hyds., 900/75/R32 rear tires, 600/65/34 front tires, SN#ZCRD02885
• 2013 New Holland T-8360, 1100 LSW Tires, 18sp power shift, front suspension, auto steer pkg, 4700 hours
• John Deere 4240, cab, heat, air, 18.4x38 tire & duals, 148 loader, quick bucket & spear, 2nd owner, Quad range, 2 remotes, 9387 hrs
• 1996 John Deere 8300, MFD, 18.4x46” tires & duals, front weights, buddy seat, powershift, 2 PTO’s, quick hitch, 3715 hrs
• 1981 John Deere 4240, 5793 hours, quad trans, 2 hyd. outlets, 2 PTO’S, quick hitch, rock box, 1 owner tractor
• 1992 John Deere 4255, power shift, 2 WD, duals, rock box, quick hitch, 455 hrs, one owner
• 1992 John Deere 2755, cab, heat, air, quad trans, 3619 hours, 2wd, quick hitch, one owner
• 2008 John Deere 7430, Premium IVT trans, front suspension, MFD, 2 PTO’s, 2 function elec joystick, 1030 hrs
• John Deere 8650 w/blade
• 1999 John Deere 8100 MFD, 3367 hrs, 18.4x46 duals, 3 remotes, 38 gal pump, SN#RW8100P026566
• Allis Chalmers 190 (non-runner)
• Allis Chalmers 7010 (no motor)
• John Deere 3020, gas, synchro side console
• Allis Chalmers 130, gas motor, good rubber
• Allis Chalmers 7040, cab
• Allis Chalmers B (non-runner)
• Farmall B, narrow front, fenders, pto (non-runner)
• Allis Chalmers G, duals, (non-runner)
• Allis Chalmers CA, (non-runner)
• Massey Harris (non-runner)
• Case w/ homemade blade (non-runner)
• Allis Chalmers, wide front, pto, (non-runner)
• Ford, 3 pt, bucket (non-runner)
• Tractor, wide front, pto, (non-runner)
• Allis Chalmers, wide front, pto, (non-runner)
• Massey Harris, NF w/ push blade
• Allis Chalmers
• Ford w/loader
• Farmall w/loader, wide front
• International 1086, cab, heat. 2,540 hours tack shows, diesel, 3 pt, 18.4x38 rubber
• David Brown 1200A, selectamatatic

FARM EQUIPEMNT

• 2013 Kuhn Krause TL6200 Landsman 21’ soil finisher, 3 bar harrow & rolling baskets
• Kuhn Krause TL6200 Landsman 45’ soil finisher, 3 bar harrow, rolling baskets, hyd. gang adjust, single point control
• 2012 Krause 5635 Field Cultivator, 50’, 3 bar harrow, rolling baskets, single point depth control, front dolly wheels, knock on sweeps
• John Deere Van Brunt Drill, 12’, single disc opener w/grass seed
• 2010 Case IH 330 Vertical Till, 34’, rolling baskets, hyd. tilt, single point depth control
• 2011 McFarlane RD 4044 RB6
• McFarlane RD 4030 RB6, 30’ disc reel, chopping basket, 3 bar harrow, rolling basket
• Krause TL-6200 Soil Finisher, 45’, 3 bar harrow, rolling baskets, hyd. adjust front gang, always stored inside
• M&W Earth Master 9900, 9 shank ripper
• Meridan 240 RTS seed tender
• Kuhn/Knight 5042, TMR mixer
• John Deere 230 disc, Rigid, 25’, black
• John Deere 120 stalk chopper, 350 monitor, heavy duty down springs, high speed, SN#P00120X002738
• DMI 2500 5 shank 3pt ripper, colter disc w/leveler, SN#623411
• Dura Tech Hay Buster 2640, bale processor, RH discharge w/ bunk attachment, SN#26FJ303950
• Brillion SST 1201, 10’ seeder
• Meridan 990 Fuel Tender, Honda gas powered fuel pump w/ 50’ hose, elect def pump w/ 100 gal. def tank, fuel cap: 900 gal, alum rims
• DMI Anhydrous Applicator, 13 shank, Raven rate controller with no monitor, takes a Raven 440
• DMI 40’ Crumbler, pull type, hyd. fold
• Allis Chalmers 2000, 4 bottom plow
• John Deere 2700 7 shank ripper
• Case IH 580 chisel plow

• John Deere 845 field cultivator Keewanee #370, 24’, 3 bar harrow, walking tandems

• Allis Chalmers Disc 16’
• 16’ digger
• 3 pt digger, 8’
• Allis Chalmers sickle mower
• Mounted field cultivator
• 3 bottom plow
• Old John Deere front mount cultivator (parts)
• Land Walker anhydrous bar
• 9 ton dry fertilizer tender w/auger
• John Deere 2210 Field Cult, 27’x 6”, level-left, 55 200lb standards, 7” tru-width sweeps, walking tandems, 4 bar harrow
• Gehl 10 Wheel V Rake
• John Deere 24T baler, small
• Handlair 560 Grain Vac, 6” w/extra pipe & hose, low hours
• Gehl Mixermill
• Blue Jet 40’ NH3 Applicator, Raven Super cooler, front, colters, double disc sealers, Raven 440 monitor, 15 shank, 3 pt

COMBINE

• 1995 John Deere 9500, 3950 engine hours, 2700 sep hours, 18.4x38 tires, duals, hopper ext., yield monitor, SN#H009500X667569
•  

PLANTERS

• John Deere 7200, 16 row, 30”, E set vac meters, insecticide boxes, seed box extensions
• 2004 John Deere 1770NT, 16 row planter, liq. fert., single disc, 600 gal tank, seed & insecticide box, quich hitch, SN#A01770Y705102

• John Deere 1760, hyd. wing-fold, 3 bu hoppers, monitor, L&D liquid fert.
• Case IH 1200, 16/31 row, liq fert, Case IH universal display monitor, row cleaners, corn/bean plates, ag leader, clutches
• John Deere 7200,16 row, liq fert., piston pump, dry insecticide, seed unit ext, dosatron trash whips, in furrow fert., precision units
• 2008 KINZE 3000, 8 row, 30” planter, liq. fert., single notch openers, piston pump, hyd. seed drive, Martin combo coulters, row cleaners, insecticide, ag leader elec clutches, seed box ext, ag leader planter module
• 2015 Kinze 3700 ASD, 24 row 20” planter, Kinze colter/trash combo, pneumatic down pressure, bulkfill, insecticide, liquid fert w/red ball, hyd. seed drive, corn & bean plates, elect row clutches, ISO (no monitor) SN#104590
•  
• KINZE planter parts
   

AUGERS & CONVEYORS

• 10”x40’ Fertal auger, PTO drive

WAGON & GRAIN CARTS

• EZ-Flow wagon & gear
• Willmer dry box & gear, gas power unit
• Hay Wagon
• (2) feeder wagon, tandem axle

HEADS & HEAD TRAILERS

• John Deere 925F Flex head, new ploy, newer guards & sickle, SN#H00925F676438
• John Deere 843 corn head, 2 seasons on knife rolls, JD poly, SN#H00843X630679
• John Deere 925F bean head
• John Deere 220 Flex bean head
• EZ Trail 25’ head cart
• 2012 John Deere 612C, chopping corn head
• Unverth round runner head cart, 36’

• 2017 John Deere 612FC Stalkmaster Corn Head, 12 row, 30”, folding hyd. deck plates, stalk stompers, knife rolls, row sense

SPRAYERS

• Top Air TA 800, 800 gal, 60’ X fold hyd. pump boom, 440 monitor, Raven controls
• FAST sprayer 9600, 60’ booms, 1150 gal, hyd pump/motor, Raven 450 monitor

CONSTRUCTION EQUIP

• 1982 CAT D7G Dozer, 12’, 75 dozer, blade w/tilt, 3306 Cat motor, 50,000 lbs., 24” pads, everything runs, trans needs work, SN#92V8607
• 2009 Deere 700J LGP Dozer, cab, heat, air, 30” tracks, 7500 hours
• 1957 Northwest #6 Drag Line, 50’ stick, 1 yd bucket, 21 Murphy motor, runs, has original paperwork

SKIDLOADER-TELEHANDLER

• 2013 Gehl V270 Skidloader, cab, heat, air, 168 hrs, pilots hand controls, hyd. quick tach, hydra glide, SN#GHL00270B00022021
• 2009 Bobcat V417 Telehandler, quick tach, aux. hyd., SN#AC1C11211
• 2017 JCB 560-80 Agri Plus Telehandler, hyd. quick tach w/bucket, cab, heat, air, 7191 hrs, SN#JCB54Y4HTG246922
• 2017 John Deere 855D Gator, 134 hrs, 4x4 elec lift, lights, roof, diesel

TRUCKS-TRAILERS-VEHICLES-ATV/UTV

• 2006 Kiefer Built 5th Wheel trailer, 25’ flat bed w/5’ liftable beavertail, 10,000 lbs axles, new tires, brakes work
• 2004 International 4400 DT530, water truck, tandem
• Pickup camper/topper
• 1978 Chevy C20 Scottsdale pickup
• IH single axle grain truck, (misc parts in box)
• Doonnam 53’ step deck, w/beavertail & ramps, 250/75R/17.5

MISC ITEMS

• 30”x32” tires w/ JD 10 bolt combine rims
• (16) 3 bu hoppers w/precision meter & disks, off JD 1770
• Mechanical seed drives off JD 1770
• John Deere quick hitch
• 12 Row cleaners for Kinze planter, single wheel, floating
• Int. plow parts
• Int. dual hubs
• (1) Int. wheel weight
• #14 Int. ripper parts
• (4) 650/65 R-38 Floater tires, fits JD 4830
• Liquid 250-gal shuttle
• 3 pt bumper arms
• Plow coulters
• 3 wheel, 3 pt rake (Faza)
• Bale spear, quick tach mount
• 2 hay forks for skidsteer
• 2 pt quick hitch
• NH3 cooler (Raven)
• 3 link arm w/ sway block
• (2) section spike tooth harrow
• 16.5-16.1 L tire, w/8 bolt rim
• (2) Allis rims w/ cast centers
• Tire w/ axle
• (2) John Deere 3rd links
• White tarp
• NH3 hose w/distributors, supply line & parts
• 2,000 gal poly tank
• Stack mower w/misc parts
• Misc tractor tires
• Bucket
• Steel wheels w/axles
• (7) poly totes
• Pull type grader
• Round bale mover w/MN gear
• Wallace 5’ Brush cutter
• 11.2x38” Tires & Rims off H Farmall
• 84”, 80”, 75”, 66” skid steer rock & brush grapple
• Skid steer root grapple
• 84”, 80”, 75”, 66” skid steer rock bucket
• 80”, 72” skid steer brush mower
• (2) sets of pallet fork extensions
• (2) receiver hitch skid steer trailer movers
• (4) weldable quick attach plates
• Stanley MB 250 hydro hammer, just rebuilt
• 40’ high cube multi-door container, 4 doors, one end door, lock box, side forklift pockets
• 40’ high cube multi-door container, 2 side doors, one end door, lock box, forklift pockets
• 30’x85’x15’ dome storage shelter
• (2) 30’x65’x15’ dome storage shelter
• 30’x40’x15’ dome storage shelter
• (4) 20’x30’x12’ dome storage shelter
• (6) 20’ Bi-parting Wrought Iron Gate w/ Deer artwork
• (4) 14’ Bi-parting Wrought Iron Gate w/ Deer artwork
• (2) Wrought Iron Fencing, 20 pcs iron fencing, 1 piece fencing
• 500 safety cones
• Greatbear 72” hyd. skid steer vibratory roller
• (2) Greatbear 200lbs cast iron anvil
• Greatbear electric winch
• Greatbear 66” brush cutter
• Greatbear 72” hyd. rock grapple bucket
• Mobile toilet, 110V portable toilet w/ shower
• Mobile toilet, 110V portable toilet w/ double close stools
• (2) sets Greatbear extension forks
• (4) 1 cy self-dumping hopper equip. attachment
• (2) Greatbear skid steer auger w/ 3 bits
• (16) pcs x W2” x L27’ ratchet w/ min breaking strength 5000 kg
• (8) pcs x W1.5” x L27’ ratchet w/ min breaking strength 3000 kg
• (2) 5/16” 7’ G80 double legs lifting chain sling
• (5) 9200lbs Ratchet binder & (10) 3/8” 20’ G70 chain
• (5) 5400lbs Ratchet binder & (10) 5/16” 20’ G70 chain
• (38) 4.5Y-12T rigging hardware
• (22) 2T-5T webbing slings
• (2) Greatbear heavy grass fork grapple, 78” width
• (2) Greatbear rotary cultivators
• Greatbear skid steer trencher
• (2) Greatbear tree shears
• (2) 9’ containers
• (2) 8’ containers
• 4” Semi-Trash Water Pump, w/ 7.5 HP Gas Engine
• 12000W Gas Engine Generator, Electric start, 9 Hours operating time (50% load), 12000W starting power and 9000W running power
• 3” Semi-Trash Water Pump with 6.5 HP Gas Engine
• (2) pairs 72” extension forks
• 20' Heavy Duty Bi-Parting Wrought Iron Driveway Gate
• 6ft x 8ft Galvanized Metal Shed
• 11ft x 19ft Metal Garage Shed w/ Swing Door and Side Entry Door
• 72" Root Rake Attachment for Skid Steers
• 70'' Tractor Mounted 3-pto Rotary tiller, 3-PTO shaft category 2, 35-55 HP power required
• 72" Rock Skeleton Bucket
• 84" Skid Steer Rock Skeleton Grapple, two hyd pick-up cylinders
• 20’ x 30’ Arch Wall Peak Ceiling Storage Shelter, w/ heavy duty fabric cover & drive through doors on two ends
• Pro Series 30’ x 40’ Container Shelter, w/ heavy duty 17oz PVC Fabric
• 30' x 60' Peak Ceiling Storage Shelter, 12' Drive Through Doors at Both Ends
• 4" Tractor Woodchipper 3 Point Hitch, 3 PTO Shaft Included

LIVESTOCK

• (4) cattle panels (10’)
• Fence line bunk feeder
• Aerator fans
• Metal feed bunk
• ~18 2020 1st crop, round hay bales, kept inside, no rain

SHOP MISC

• L shaped fuel tank
• 2-way radio antenna
• Buzz saw parts
• 2,500 fuel tank w/stand, gas powered pump & hose
• (2) Steelman 7’ work benches, 10 drawers, 2 cabinets
• (2) Steelman 7’ work benches, 20 drawers
• (3) Steelman 7’ work benches, 18 drawers
• (2) Steelman 10’ work benches, 15 drawers, 2 cabinets
• (2) Steelman 10’ work benches, 25 drawers
• Steelman 10’ work bench, 40 drawers
• Champion 15 hp Air Compressor, screw type
• 40 Gallon 2-stage 9HP 302cc Engine Air Compressor
• 8-Piece Pre-Assembled Garage Cabinet Combo, w/ workbench station
• 4000 PSI Hot Water Pressure Washer,w/ 14 HP Kohler Engine &100-ft Hose Reel
• 20-Gallon Oil Drainer, w/ evacuation hose
• 80" Tool Chest, w/ 12 Drawers
• 2HP Semi-Automatic Tire Changer
• Tow strap 3'' X 30'
• Heavy Duty Wheel Balancer Self-Calibrating Self-Diagnosis
• 10-ft 30-Drawer Heavy Duty Workbench, w/ keyed-alike locks
• 10ft 20-Drawer Heavy Duty Workbench Cabinet Combo, with 68” Pegboard & Stainless Drawer Panels

SNOW REMOVAL

• Craftsman 22” snowblower, 2 stage, elect start
• Greatbear YS-86” hyd. snowplow

• 84'' Skid Steer Snow Bucket
• 86'' Skid Steer Hydraulic Dozer Blade/snow pusher
• Horst SB 4000 w/ 1218, 12’ snow plow w/ bracket, fits 7420 tractor

LATE CONSIGNMENTS

• 2010 John Deere 637 Disc, 37’10”, rock flex, hyd. tilt, single point depth control
• Roof top wind reflector
• 5th plate off semi
• Set of 18x38 duals, came off a 4450
• Bulk bin, 12–14-ton, boot on bottom
• Dicks welding grain tank extension, off a 690 JD, bubble up auger with it
• 2012 Polaris Ranger 800 XP, limited edition, has just been serviced by local Polaris dealer, 4775 miles, 667 hours
• 2004 Ford Ranger XLT, auto, 4.0 V-6 motor, 120k miles, 4x4, ext. cab, excel. tires
• 2019 Manitou MLT 840-145 PS telehandler, 9000lbs lift, power attach, boom suspension, 535 hrs
• (2) soft side doors, off side by side UTV
• Fittings & valves for liq. Fertilizer, hose
• JD 980 digger, 35’
• Water Fertilizer Tank, fiberglass, on running gear, 5” 2hp pump
• (1) 235x70x16 tire
• Case IH field cult. Shanks & parts
• DMI Tiger III Ripper, excellent shape, SN#121296
• (6) 16’ 2x4, Cottonwood, do have a slight curve to them
• 65 T posts
• DEMCO HT1000 sprayer, 60’ boom, foamer, hyd. pump, triple nozzle bodies, chemical inductor
• John Deere 250 skidloader, cab, heat, hand controls, 5520 hours
• 2000 trailer, 16’ w/ 5’beavertail, elect winch, bumper pull
• Wil-Rich Quad X, 60’, 3 bar harrow, rolling baskets
• Assortment of lumber

• TO CONSIGN CALL:
• HAMILTON AUCTION COMPANY AT
• 507 584 0133 OFFICE
• Terms: Cash, good check or credit card
• Nothing to be removed until settled for.
• Check website for complete terms.
• www.hamiltonauctioncompany.com
•  
• +++++++++++++++
• +++++++++++++++
•  
• Sale conducted by: Hamilton Auction Co., 130 State Hwy 16, Dexter, MN 55926
• Phn. 507 584 0133 office